🎉 Up to 70% Off Selected ItemsShop Sale
Ballade Sports S2000 GT35 K Swap Titanium Turbo Kit
Ballade Sports S2000 GT35 K Swap Titanium Turbo Kit Is the same kit we offer for the F20C/F22C S2000 engine but with a K Series Turbo Manifold made to fit K swapped S2000s.
Fit ALL Year Model S2000s!!
This is a fully bolt on kit. Fits to your Stock Catalytic Converter. Does not require any welding, cutting or modifying.
Stock Oil Filter Location. No relocation needed!!
Included:
- Ballade Sports GT35 / T4 Size Ball Bearing Turbo (Black Coated Inlet). Rated for 500-600 whp
- Optional GARRETT GBC35-700 Available!! Click Link to Add
- 321 Stainless Titanium Turbo Manifold
- TurboSmart Wastegate Hypergate 45
- TurboSmart Compact BlowOff Valve
- All New - Titanium Pie Cut 2pc 3 inch Downpipe
- All New - Titanium Pie Cut 1.75 inch Dump Tube
- Newly Revised - Intercooler Core Size: 24"x12"x3" (Now 8 Degrees Colder Air)
- All New - Titanium Pie Cut 2pc 3 inch Left & Right Intercooler Pipes
- 3 inch Black Silicone Straight Coupler
- 2.5 inch Black Silicone Straight Coupler
- 3 inch 90 Degree Black Silicone Elbow Coupler
- 2.5 to 3 inch 90 Degree Black Silicone Elbow Reducer
- 2x - 3 inch V Band Clamps
- 5x - 3 inch Stainless Steel T-bolt Clamps
- 3x - 2.5 inch Stainless Steel T-bolt Clamps
- K SERIES OIL RETURN TIMING TENSIONER COVER
- 18 inch length AN10 Premium Nylon Race Hose Oil Return Line
- AN10 x 90 Degree Swivel Hose Fitting
- AN10 x 45 Degree Swivel Hose Fitting
- Fragola AN4 PFTE Black Oil Feed Hose
- 25mm ID x 32 inch Length High Temp Fire Hose Sleeve for Oil Return/Coolant Lines
- 10mm ID x 18 inch Length High Temp Fire Hose Sleeve for Oil Feed Line
- T4 Turbo Blanket
- 4 inch Turbo Guard
- 50mm x 48 inch Length Gold Thermal Heat Barrier Tape
- Stainless Steel AN4to 1/8 NPT Fitting
- Stainless Steel 1/8 NPT to 1/8 NPT Fitting
- Stainless Steel Female T Fitting 1/8 NPT
- 6061 Aluminum AN10 Turbo Oil Drain Flange Fitting
- ¼ inch x 36 inch length Vacuum Rubber Black Hose
- 3 inch Donut Exhaust Down pipe Gasket
Ballade GT35 Turbo Specs:
- 4" Air Inlet, 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Ball Bearing Turbo
- Oil and Water Cooled
- .70 A/R Compressor
- .68 A/R Turbine
- 46mm Vband Wastegate
Turbo Manifold Specs:
- 321 Stainless Steel Titanium Material
- 11 Gauge Thick Wall
- T4 Turbo Flange
- 46mm Wastegate Vband Flange
- Optional Bronze Ceramic Coated
Not Included but Needed to complete:
- Upgraded Injectors x4
- Upgraded In tank Fuel Pump
- ECU Management Example: Hondata Kpro/Flashpro, Haltec, AEM etc.
- (Optional) Boost Solenoid
- (Optional) Upgraded 4 Bar Map Sensor - Stock Map Sensor 10psi Only
Recommendations:
- ID1050cc Injectors:
- https://balladesports.com/products/injector-dynamics-00-09-honda-s2000-injector-set-00-05-s2000-1050cc?_pos=1&_sid=e524ffc7c&_ss=r
- Walbro Fuel Pump
- https://balladesports.com/products/walbro-255lph-hp-fuel-pump-gss-342?_pos=1&_sid=ddf7decb5&_ss=r
- Ballade Kpro PnP Harness
- https://balladesports.com/collections/tuning/products/hondata-00-05-s2000-kpro-plug-and-play-no-sensor-conversion
- Hondata Kpro
- https://balladesports.com/collections/tuning/products/hondata-kpro-ecu
- Hondata Flashpro
- https://balladesports.com/products/hondata-2006-s2000-flashpro?_pos=1&_sid=e83654e56&_ss=r
- Highly recommend removal of air pump in the lower bumper
Select Turbo Option
From $1,058.75
Original: $3,025.00
-65%Ballade Sports S2000 GT35 K Swap Titanium Turbo Kit—
$3,025.00
$1,058.75More Images
Ballade Sports S2000 GT35 K Swap Titanium Turbo Kit
Ballade Sports S2000 GT35 K Swap Titanium Turbo Kit Is the same kit we offer for the F20C/F22C S2000 engine but with a K Series Turbo Manifold made to fit K swapped S2000s.
Fit ALL Year Model S2000s!!
This is a fully bolt on kit. Fits to your Stock Catalytic Converter. Does not require any welding, cutting or modifying.
Stock Oil Filter Location. No relocation needed!!
Included:
- Ballade Sports GT35 / T4 Size Ball Bearing Turbo (Black Coated Inlet). Rated for 500-600 whp
- Optional GARRETT GBC35-700 Available!! Click Link to Add
- 321 Stainless Titanium Turbo Manifold
- TurboSmart Wastegate Hypergate 45
- TurboSmart Compact BlowOff Valve
- All New - Titanium Pie Cut 2pc 3 inch Downpipe
- All New - Titanium Pie Cut 1.75 inch Dump Tube
- Newly Revised - Intercooler Core Size: 24"x12"x3" (Now 8 Degrees Colder Air)
- All New - Titanium Pie Cut 2pc 3 inch Left & Right Intercooler Pipes
- 3 inch Black Silicone Straight Coupler
- 2.5 inch Black Silicone Straight Coupler
- 3 inch 90 Degree Black Silicone Elbow Coupler
- 2.5 to 3 inch 90 Degree Black Silicone Elbow Reducer
- 2x - 3 inch V Band Clamps
- 5x - 3 inch Stainless Steel T-bolt Clamps
- 3x - 2.5 inch Stainless Steel T-bolt Clamps
- K SERIES OIL RETURN TIMING TENSIONER COVER
- 18 inch length AN10 Premium Nylon Race Hose Oil Return Line
- AN10 x 90 Degree Swivel Hose Fitting
- AN10 x 45 Degree Swivel Hose Fitting
- Fragola AN4 PFTE Black Oil Feed Hose
- 25mm ID x 32 inch Length High Temp Fire Hose Sleeve for Oil Return/Coolant Lines
- 10mm ID x 18 inch Length High Temp Fire Hose Sleeve for Oil Feed Line
- T4 Turbo Blanket
- 4 inch Turbo Guard
- 50mm x 48 inch Length Gold Thermal Heat Barrier Tape
- Stainless Steel AN4to 1/8 NPT Fitting
- Stainless Steel 1/8 NPT to 1/8 NPT Fitting
- Stainless Steel Female T Fitting 1/8 NPT
- 6061 Aluminum AN10 Turbo Oil Drain Flange Fitting
- ¼ inch x 36 inch length Vacuum Rubber Black Hose
- 3 inch Donut Exhaust Down pipe Gasket
Ballade GT35 Turbo Specs:
- 4" Air Inlet, 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Ball Bearing Turbo
- Oil and Water Cooled
- .70 A/R Compressor
- .68 A/R Turbine
- 46mm Vband Wastegate
Turbo Manifold Specs:
- 321 Stainless Steel Titanium Material
- 11 Gauge Thick Wall
- T4 Turbo Flange
- 46mm Wastegate Vband Flange
- Optional Bronze Ceramic Coated
Not Included but Needed to complete:
- Upgraded Injectors x4
- Upgraded In tank Fuel Pump
- ECU Management Example: Hondata Kpro/Flashpro, Haltec, AEM etc.
- (Optional) Boost Solenoid
- (Optional) Upgraded 4 Bar Map Sensor - Stock Map Sensor 10psi Only
Recommendations:
- ID1050cc Injectors:
- https://balladesports.com/products/injector-dynamics-00-09-honda-s2000-injector-set-00-05-s2000-1050cc?_pos=1&_sid=e524ffc7c&_ss=r
- Walbro Fuel Pump
- https://balladesports.com/products/walbro-255lph-hp-fuel-pump-gss-342?_pos=1&_sid=ddf7decb5&_ss=r
- Ballade Kpro PnP Harness
- https://balladesports.com/collections/tuning/products/hondata-00-05-s2000-kpro-plug-and-play-no-sensor-conversion
- Hondata Kpro
- https://balladesports.com/collections/tuning/products/hondata-kpro-ecu
- Hondata Flashpro
- https://balladesports.com/products/hondata-2006-s2000-flashpro?_pos=1&_sid=e83654e56&_ss=r
- Highly recommend removal of air pump in the lower bumper
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ballade Sports S2000 GT35 K Swap Titanium Turbo Kit Is the same kit we offer for the F20C/F22C S2000 engine but with a K Series Turbo Manifold made to fit K swapped S2000s.
Fit ALL Year Model S2000s!!
This is a fully bolt on kit. Fits to your Stock Catalytic Converter. Does not require any welding, cutting or modifying.
Stock Oil Filter Location. No relocation needed!!
Included:
- Ballade Sports GT35 / T4 Size Ball Bearing Turbo (Black Coated Inlet). Rated for 500-600 whp
- Optional GARRETT GBC35-700 Available!! Click Link to Add
- 321 Stainless Titanium Turbo Manifold
- TurboSmart Wastegate Hypergate 45
- TurboSmart Compact BlowOff Valve
- All New - Titanium Pie Cut 2pc 3 inch Downpipe
- All New - Titanium Pie Cut 1.75 inch Dump Tube
- Newly Revised - Intercooler Core Size: 24"x12"x3" (Now 8 Degrees Colder Air)
- All New - Titanium Pie Cut 2pc 3 inch Left & Right Intercooler Pipes
- 3 inch Black Silicone Straight Coupler
- 2.5 inch Black Silicone Straight Coupler
- 3 inch 90 Degree Black Silicone Elbow Coupler
- 2.5 to 3 inch 90 Degree Black Silicone Elbow Reducer
- 2x - 3 inch V Band Clamps
- 5x - 3 inch Stainless Steel T-bolt Clamps
- 3x - 2.5 inch Stainless Steel T-bolt Clamps
- K SERIES OIL RETURN TIMING TENSIONER COVER
- 18 inch length AN10 Premium Nylon Race Hose Oil Return Line
- AN10 x 90 Degree Swivel Hose Fitting
- AN10 x 45 Degree Swivel Hose Fitting
- Fragola AN4 PFTE Black Oil Feed Hose
- 25mm ID x 32 inch Length High Temp Fire Hose Sleeve for Oil Return/Coolant Lines
- 10mm ID x 18 inch Length High Temp Fire Hose Sleeve for Oil Feed Line
- T4 Turbo Blanket
- 4 inch Turbo Guard
- 50mm x 48 inch Length Gold Thermal Heat Barrier Tape
- Stainless Steel AN4to 1/8 NPT Fitting
- Stainless Steel 1/8 NPT to 1/8 NPT Fitting
- Stainless Steel Female T Fitting 1/8 NPT
- 6061 Aluminum AN10 Turbo Oil Drain Flange Fitting
- ¼ inch x 36 inch length Vacuum Rubber Black Hose
- 3 inch Donut Exhaust Down pipe Gasket
Ballade GT35 Turbo Specs:
- 4" Air Inlet, 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Ball Bearing Turbo
- Oil and Water Cooled
- .70 A/R Compressor
- .68 A/R Turbine
- 46mm Vband Wastegate
Turbo Manifold Specs:
- 321 Stainless Steel Titanium Material
- 11 Gauge Thick Wall
- T4 Turbo Flange
- 46mm Wastegate Vband Flange
- Optional Bronze Ceramic Coated
Not Included but Needed to complete:
- Upgraded Injectors x4
- Upgraded In tank Fuel Pump
- ECU Management Example: Hondata Kpro/Flashpro, Haltec, AEM etc.
- (Optional) Boost Solenoid
- (Optional) Upgraded 4 Bar Map Sensor - Stock Map Sensor 10psi Only
Recommendations:
- ID1050cc Injectors:
- https://balladesports.com/products/injector-dynamics-00-09-honda-s2000-injector-set-00-05-s2000-1050cc?_pos=1&_sid=e524ffc7c&_ss=r
- Walbro Fuel Pump
- https://balladesports.com/products/walbro-255lph-hp-fuel-pump-gss-342?_pos=1&_sid=ddf7decb5&_ss=r
- Ballade Kpro PnP Harness
- https://balladesports.com/collections/tuning/products/hondata-00-05-s2000-kpro-plug-and-play-no-sensor-conversion
- Hondata Kpro
- https://balladesports.com/collections/tuning/products/hondata-kpro-ecu
- Hondata Flashpro
- https://balladesports.com/products/hondata-2006-s2000-flashpro?_pos=1&_sid=e83654e56&_ss=r
- Highly recommend removal of air pump in the lower bumper
